SFS Suomen Standardit ry:n toimialayhteisöt koordinoivat oman toimialansa standardointityötä standardointiryhmissä. Paltan toimialaan kuuluvat mm. ajoneuvot, liikenne ja logistiikka, kiskoliikenne, terveydenhuolto ja hyvinvointi, liikunta ja vapaa-aika, ympäristö ja kierrätys sekä lasirakenteet.
Alla lista Paltan vastuukomiteoiden helmikuussa julkaisemista SFS- ja ISO-standardeista.
Liikenne
- SFS-EN 17249-5:2025:en Intelligent transport systems. eSafety. Part 5: eCall for UNECE category L1 and L3 powered two-wheel vehicles
- Korvaa: CEN/TS 17249-5:2022:en:2022
- SFS-EN ISO 13143:2025:en Electronic fee collection. Evaluation of on-board and roadside equipment for conformity to ISO 12813 (ISO 13143:2025)
- Korvaa: SFS-EN ISO 13143-1:2020:en
- SFS-EN ISO 15118-10:2025:en Road vehicles. Vehicle to grid communication interface. Part 10: Physical layer and data link layer requirements for single-pair Ethernet (ISO 15118-10:2025)
- ISO/TR 24856:2025 Intelligent transport systems — Mobility integration — Role model of the human-centric predictive risk information provisioning service
- ISO 6518-1:2025 Road vehicles — Ignition systems — Part 1: Vocabulary
- ISO/PAS 23735:2025 Road vehicles — Ergonomic design guidance for external visual communication from automated vehicles to other road users
- ISO/TR 8955:2025 Railway infrastructure — Track quality evaluation — Chord-based method
- ISO 5474-4:2025 Electrically propelled road vehicles — Functional and safety requirements for power transfer between vehicle and external electric circuit — Part 4: Magnetic field wireless power transfer
- ISO/TS 24315-1:2025 Intelligent transport systems — Management of electronic traffic regulations (METR) — Part 1: Vocabulary
- ISO 20766-22:2025 Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 22: Power supply bushing (fuel pump/actuators/fuel level sensor)
- ISO 20766-19:2025 Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 19: Gas-tube pressure relief valves
- ISO 15118-10:2025 Road vehicles — Vehicle to grid communication interface — Part 10: Physical layer and data link layer requirements for single-pair Ethernet
Terveydenhuolto
- SFS-EN ISO 10993-4:2017/A1:2025:en Biological evaluation of medical devices. Part 4: Selection of tests for interactions with blood. Amendment 1 (ISO 10993-4:2017/Amd 1:2025)
- SFS-EN ISO 10993-5:2009/A11:2025:en Biological evaluation of medical devices. Part 5: Tests for in vitro cytotoxicity
- SFS-EN ISO 15883-1:2025:en Washer-disinfectors. Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2024)
- Korvaa: SFS-EN ISO 15883-1/A1:en:2014
- Korvaa: SFS-EN ISO 15883-1:en:2009
- Korvaa: SFS-EN ISO 15883-1 + A1:2014
- SFS-EN ISO 15883-2:2025:en Washer-disinfectors. Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for critical and semi-critical medical devices (ISO 15883-2:2024)
- Korvaa: SFS-EN ISO 15883-2:2009
- Korvaa: SFS-EN ISO 15883-2:en:2009
- SFS-EN ISO 15883-3:2025:en Washer-disinfectors. Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers (ISO 15883-3:2024)
- Korvaa: SFS-EN ISO 15883-3:2009
- Korvaa: SFS-EN ISO 15883-3:en:2009
- SFS-EN ISO 5840-1:2021/A1:2025:en Cardiovascular implants. Cardiac valve prostheses. Part 1: General requirements. Amendment 1 (ISO 5840-1:2021/Amd 1:2025)
- SFS-EN ISO 5840-2:2021/A1:2025:en Cardiovascular implants. Cardiac valve prostheses. Part 2: Surgically implanted heart valve substitutes. Amendment 1 (ISO 5840-2:2021/Amd 1:2025)
- SFS-EN ISO 5840-3:2021/A1:2025:en Cardiovascular implants. Cardiac valve prostheses. Part 3: Heart valve substitutes implanted by transcatheter techniques. Amendment 1 (ISO 5840-3:2021/Amd 1:2025)
- SFS-EN ISO 13402:2025:en Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:2025)
- Korvaa: SFS-EN ISO 13402:en:2000
- ISO 8536-6:2025 Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
- ISO 7176-14:2022/Amd 1:2025 Wheelchairs — Part 14: Power and control systems for electrically powered wheelchairs and scooters — Requirements and test methods — Amendment 1: Correction of referred standard
- ISO 8871-5:2025 Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing
- ISO 15883-7:2025 Washer-disinfectors — Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-critical thermolabile medical devices and health care equipment
- ISO 13402:2025 Surgical and dental hand instruments — Determination of resistance against autoclaving, corrosion and thermal exposure
- ISO 16840-12:2021/Amd 1:2025 Wheelchair seating — Part 12: Envelopment and immersion characterization of seat cushions using a dual semispherical indenter — Amendment 1
- ISO 5840-2:2021/Amd 1:2025 Cardiovascular implants — Cardiac valve prostheses — Part 2: Surgically implanted heart valve substitutes — Amendment 1
- ISO 5840-1:2021/Amd 1:2025 Cardiovascular implants — Cardiac valve prostheses — Part 1: General requirements — Amendment 1
- ISO 5840-3:2021/Amd 1:2025 Cardiovascular implants — Cardiac valve prostheses — Part 3: Heart valve substitutes implanted by transcatheter techniques — Amendment 1
- ISO 16840-13:2021/Amd 1:2025 Wheelchair seating — Part 13: Determination of the lateral stability property of a seat cushion — Amendment 1 ISO 15223-1:2021/Amd 1:2025 Medical devices — Symbols to be used with information to be supplied by the manufacturer — Part 1: General requirements — Amendment 1: Addition of defined term for authorized representative and modified EC REP symbol to not be country or region specific
Vapaa-aika
- SFS-EN 14960-4:2025:en Inflatable play equipment. Part 4: Additional safety requirements and test methods for bungee runs
- ISO 6289:2025 Skis — Vocabulary
Rakentaminen
- SFS-EN 17940:2025:en Glass in building. Folio interlayers for the manufacturing of laminated glass
Standardeja voi hakea ja ostaa kätevästi SFS:n verkkokaupasta.
Lisätiedot
Kimmo Konkarikoski
Standardointipäällikkö, Standardointi
Elinkeinopolitiikka
Lue lisää standardoinnista
Standardointi on yhteisten toimintatapojen laatimista ja niiden kirjaamista lopputuotteeseen eli standardiin. Suomessa standardoinnista vastaa SFS Suomen Standardit ry toimialayhteisöineen. Palvelualojen työnantajat Palta on SFS:n jäsen ja yksi sen 9 toimialayhteisöstä.
